What surfaces can Signet’s Line Marking paint be used on?
Signet’s Own Line Marking Aerosols are best used on timber, bitumen and concrete.
How long should I shake the Line Marking Aerosol for?
Shake the can for at least 30 seconds after the marble starts rattling. The can should also be shaken regularly during use, every couple of minutes, to ensure consistency is maintained.
How many metres can I get out of a Line Marking can?
A 500g can of Signet’s Own Line Marking Aerosols produces approximately 80m of line, single coat under standard conditions (i.e. 60mm line width).
How long does it take for your Line Marking Paints to dry?
Signet’s Own Line Marking Aerosols take 5-7 minutes to dry per coat. These times are dependent on the weather conditions and number of coats applied.
What is the easiest way to remove Line Marking Paint if an error is made?
Once dry, Signet’s Line Marking Paints cannot be removed, however, Signet does offer a black or grey Line Marking Aerosol to match typical ground/floors colours and can be used to cover errors.
How do I prevent my Line Marking can from blocking up?
To prevent blocked nozzles, you need to ensure the aerosol can is properly prepared before spraying and is cleared after spraying. To prepare the can, shake for at least 30 seconds after the marble starts rattling. Once you finish spraying, hold the can upright and spray the can until the spray becomes clear of paint and there is no residue left on the nozzle.
How do I store my Line Marking cans?
Signet’s Own Line Marking Cans should be stored in a cool and dry environment, below 50°C.
How long will Signet’s Line Marking Paint last in storage?
Signet’s Own Line Marking Aerosols should last indefinitely if stored correctly.
Does Signet have other colours of the Line Marking Paint?
Yes, Signet stock 10 different colours of Signet’s Own Line Marking Aerosols. View the full Line Marking Aerosol range.
What is the base of Signet’s Line Marking paints?
Signet’s Own Line Marking Aerosols are solvent-based.
Is Signet’s Line Marking Paint toluene-free?
Yes, it is completely toluene-free.
Do you have Safety Data Sheets (SDS) for your Line Marking Paints?
Yes, you can find the SDS and Technical Data Sheet for all of Signet’s paints attached on the product page.
Where are Signet’s Line Marking paints made?
All of Signet’s paints are Australian-made in our Colourpack facility at our Brisbane Head Office.
What accessories should I use with my Line Marking Paint?
Signet’s Own Line Marking Aerosols are designed to be used in a Signet’s Line Marking Trolley. You can also add masking wheels to ensure a crisp line.
